We are very glad that you have chosen an Eminent suitcase. Follow the instructions below to set up a lock combination of your choice or to change your lock combination. The design of your lock might defer from the illustrations below, this has however no influence on the process of setting the lock code.
Upon delivery our locks are set to the default combination 0-0-0. To set a new locking code the lock must be unlocked first.
To do so please make sure the combination 0-0-0 is entered and press the button marked with A towards the dials.
Note: If you are changing an existing lock combination please enter the lock combination currently set and not the default combination 0-0-0.
To initiate the change of the lock combination the reset button - marked with B - must first be pressed. The button is located at the side of the lock.
Use a pen to press down the button. To avoid unintended changes of the combination it is required to hold down the button with the pen while changing the combination in step 3.
Use the dials marked with C and set them to the combination of your choice. Once you have set your combination please make sure that the dials are completely aligned and that the dial is not set between two numbers.
After you have setup your lock combination you can remove the pen from the reset button. It is normal if the reset button remains pressed down after removing the pen.
Use the button marked with A to open the lock. The reset button should automatically return to its original condition.
You have finished the setup successfully. You can return to this instruction at any time to change your the combination to a new one.
Please do not insert keys, screwdrivers or other objects into the keyhole of the lock. This will result in damages to the lock cylinder making the lock unusable.