How to set your lock
We are very glad that you have chosen an Eminent suitcase. Follow the instructions below to set up a lock combination of your choice or to change your lock combination. The exact design of your lock might defer from the illustrations below, this has however no influence on the process of setting the lock code.
Upon delivery our locks are set to the default combination 0-0-0. To set a new locking code the lock must be unlocked first.
To do so please make sure the combination 0-0-0 is entered and slide the button marked with E towards the dials. Please note that the lock cannot be unlocked by pressing the button.
Note: If you are changing an existing lock combination please enter the lock combination currently set and not the default combination 0-0-0.
To initiate the change of the lock combination the reset button must first be pressed. The button is located at the right side of the lock. In the illustration above it is marked with A.
Use a pen to press down the reset button. To ensure that the lock combination is not set to an unintended combination it is necessary that the reset button is constantly pressed while setting the new combination in step 3.
Use the dials marked with D and set them to the combination of your choice. Once you have set your combination please make sure that the dials are completely aligned and that the dial is not set between two numbers.
After you have setup your lock combination you can remove the pen from the reset button and slide the button to unlock the the lock - marked with E - towards the dials. Your combination has now been set.
To lock the suitcase simply push the zipper pullers - marked with B - into the lock. To unlock the suitcase slide button E towards the dials.
The integrated USB port allows you to charge your phone and other accessories without opening the suitcase. For this purpose the lock features a USB port which can be connected to a power bank stored inside the suitcase.
To connect the lock to your power bank it needs to be connected to the Micro USB port on the backside of the lock. In some cases it is necessary to open the maintenance zipper on the inside of the lining to access the backside of the lock and install the cable.
To protect the USB port from damages it is protected with a cover - marked with F. The cover can be removed by pulling it up.
Afterwards, you can connect a USB cable as usual using the USB port marked with H.
You have finished the setup successfully. You can return to this instruction at any time to change your the combination to a new one.
Please do not insert keys, screwdrivers or other objects into the keyhole of the lock. This will result in damages to the lock cylinder making the lock unusable.
